Watoto Church Signages

Watoto Church Downtown

We fabricated and installed a 3D signage with the words "Welcome Home" for the Watoto Church Downtown reception. The word "Home" was internally lit with LED strips and the signage was directly installed onto a stone wall.

Worship Arts Office:
We were requested for an acrylic cut out of the map of Africa graphic. We also fabricated 3d non-lit signage from mirrored acrylic of the worship arts logo.

Cell Office:
The client requested us to fabricate a concept where the Watoto 'W' lit from the edges. We laser cut mirrored acrylic for this job, installed it at an offset from the wall and backlit it with LEDs.

Downtown Stone Wall Signage
The client requested us to install their mission onto a stone wall next to the auditorium. The letters were cut out of acrylic and bolted onto the wall.

When the celebration campus at Entebbe was being launched, the client requested us to fabricate a 3d signage to achieve the effect as of the logo glowing on the edges, this signage was 5 meters long, 2 meters high and 0.5m thick. We executed a unique concept where we floodlit a laser-cut 3D logo from the back to achieve the desired halo effect

When the campus at Bweyogerere was being launched, the client requested us to fabricate a 3d signage to achieve the effect as of the logo glowing on the edges. This signage was 4 meters long, 2 meters high and installed at a height of about 8 meters above the ground. We executed a unique concept where we backlit the 3D logo to achieve the desired halo effect